看了鋰硼合金的用戶又看了
留言詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
一、產品名稱:鋰硼合金
Product: Lithium-Boron Alloy
二、相組成:Li7B6+Li
Phase composition: Li7B6 and Li
三、化學成分Chemical analysis
牌號 Category | 鋰含量(wt%) Mass Fraction of Lithium | 鎂含量(wt%) Mass Fraction of Magnesium | 硼含量(wt%) Mass Fraction of Boron |
Li55 | 55±2 | ≤4 | 余量 residue |
Li60 | 60±2 | ≤4 | 余量 residue |
Li65 | 65±2 | ≤4 | 余量 residue |
Li70 | 70±2 | ≤4 | 余量 residue |
四、密度Density
0.86~0.92 g/cm3,每批內產品密度**差值不超過0.04 g/cm3。
0.86~0.92 g/cm3, The maximum density difference of each batch of products is less than 0.04 g/cm3.
五、外觀Apprearance
產品為表面光亮、平整、無氧化和油斑的銀灰色質軟金屬片材或帶材。
The product is a soft silver-graymetal chips or ribbons ,the surface of which is bright and smooth without oxidation and oil spots.
六、尺寸規格Dimensions
a) 鋰硼合金片Lithium-Boron Alloy Chip
? 長度Length Range:60~120 mm
? 寬度 Width Range:60~80 mm
? 厚度Thickness Range:0.4~1.0 mm
b) 鋰硼合金帶Lithium-Boron Alloy Ribbon
? 寬度 Width Range:60~100 mm
? 厚度Thickness Range:0.4~1.0 mm
v 長(寬)度允許偏差Allowable Deviation of Length or Width:±0.2 mm
v 厚度允許偏差Allowable Deviation of Thickness:±0.015 mm
七、熱穩定性Thermal stability
產品在600℃條件下保持穩定固體形態,無鋰滲漏。
This product maintains stable solid state at 600 ℃without lithium leakage.
八、包裝方式Packaging
包裝采用開頂金屬圓罐或采用鋁塑復合袋充干燥氬氣密封。
This product is sealed with open-top round metal cans or aluminum-plastic composite bag filled with dry argon.
九、其他Others
產品尺寸規格可依據客戶商定要求確定。
The dimension of products can be customized according to customers’ needing.
暫無數據!
鋰硼合金的工作原理介紹?
鋰硼合金的使用方法?
鋰硼合金多少錢一臺?
鋰硼合金使用的注意事項
鋰硼合金的說明書有嗎?
鋰硼合金的操作規程有嗎?
鋰硼合金的報價含票含運費嗎?
鋰硼合金有現貨嗎?
鋰硼合金包安裝嗎?
手機版: